Peugeot Car Keyshell Swap

Is your car key looking like this?

a small vice hammar and som cheep tools is all you need.

Step 1: The Tools

Small screw driver to pry open the key

Hammar

Smal magnet to catch the lock that holds the key blade

Pliers

A small vice

Tape to hold the key in the right position

Driver tools

Step 2: Disasembely

Pry open the key,

Take out the electronics (and put to the side)

Take out the key blade locking "spline"

Step 3: Back Together Again

first move the blade

use the pliers to press the locking pin in place

put the electronics bak in the new key

and just press it together