First, a word of caution. Do NOT use your computer while driving! This device attaches to the steering wheel. I call it the Poor Man's Automobile Laptop Stand.

Step 1: Materials and Tools

To get started, we will need 5 to 6 feet of a large gauge of wire. I am not sure of the gauge of wire that I used here. We also will need a pair of pliers. I used angled needle-nose pliers as that is what I had readily available. Then I started bending the wire to make a pair of hooks to fit over the steering wheel and then another pair of bends that would basically make a shelf.

Step 2: Finished Laptop Stand

Step 3: Laptop Stand in Use

Here is the final picture. So, pretty simple. There is plenty of room for improvement. For this one I only did measurement by visual and it shows. There are some commercially available stands available but this suited my needs and hopefully you liked this instructable.