Introduction: If This, Then That: Portable Arduino Console
This is a simple shoot the target game. You move the player with two capacitive touch modules and you shoot by making hard sounds, like clapping, yelling or shaking the box.
Parts i used:
- Arduino Uno
- Arduino a000096 tft screen
- 2 TTP223B Touch Modules
- Sound Sensor Module
- prototyping board
- cables
MDF plate for the case.
Step 1: Connecting Everything on the Breadboard
connecting the screen:
- +5V:+5V
- MISO:pin 12
- SCK:pin 13
- MOSI:pin 11
- LCD CS:pin 10
- SD CS:pin 4
- D/C:pin 9
- RESET:pin 8
- BL:+5V
- GND:GND
Connecting the touch modules
- +5V:+5V
- 1/0 : pin 2 and/or pin 3
- GND:GND
Connecting the sound sensor:
- 1/0 : pin 5
- GND:GND
- +5V:+5V
Step 2: Upload the Code
Upload this code to your arduino with the arduino IDE and test it.
Attachments
Step 3: Time to Solder Everything
Follow the schematic to see how things need to get soldered on the prototyping board.
Step 4: Case
Saw/cut the MDF into the sides of a box and glue them together using hot glue.
When the housing is glued together, grab a can of spraypaint and spraypaint it in a color you like.
Step 5: Enjoy the Game
Put the hardware in the case and enjoy the game.