Introduction: Primitive STADIUM Battle Arena BEYBLADE 47in (1.2m)?
Hello. I'll show you how I did the arena for the game.
Sorry for the quality of the text, my English is very bad. I think you will like this article.
Step 1: Game From the Animated Series BEYBLADE BURST
The Internet is gaining popularity BEYBLADE BURST. Great original oren on sale was not found. It was decided to make the arena itself.
Step 2: Finding the Right Stadium 47in
The first thing that caught my eye was a satellite dish.The first thing that caught my eye was a satellite dish.
We will use it as a basis for the arena.
Step 3: We Flatten the Surface
On a satellite dish, there are technical holes. It was decided to cover the holes with epoxy glue.
Step 4: We Square the Surface of the Arena
First, the technical holes must be sealed with a paper tape.
Next, prepare the epoxy glue, and fill in the holes.
Step 5: Painting
Before painting the stadium in white, first you need to wipe the satellite with a degreaser.
At this stage, there was nothing difficult, just paint the arena with thin layers of paint.
Step 6: Marking in the Arena Beyblade
This stage of the work was the most difficult.
It was necessary first to mark out with a pencil where the marking lines will pass. Then paste the paper tape and paint the frame.
Step 7: Remove the Protective Tape From the Film.
It was the most pleasant etym, for it was already possible to see the result of the work.
Step 8: Soundproofing
To ensure that the strikes on the arena were quiet, noise insulation should be pasted on the back of the arena.
Step 9: Arena Boards
We glue the side of the arena with conventional glue
Step 10: Result
Making the arena shot everything on video. All can be seen on the video.
Participated in the