Remote Bluetooth Firework Igniter

38,745

497

31

About: Awesome Electronics Tutorials, Projects and How To´s

Intro: Remote Bluetooth Firework Igniter

Wouldn't it be nice to ignite more than one firework at the same time? Or even have a safe distance to more dangerous explosives. In this project I will show you how to build a circuit which can do just that with the help of the Bluetooth functionality of your smartphone. Let's get started !

Step 1: Watch the Video!

The video gives you an overview of what you need to do to build something similar. In the following steps I will present you more in depth information about it.

Step 2: Order Your Parts!

Here you can find all the parts that I used during this project:

Ebay:

4x XT60 Male+Female Connector: http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

1x ATmega 8-16PU:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

1x 28 Pin DIP Socket:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

1x FTDI Breakout:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

1x HC-06 Bluetooth Module:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

3x 0.5W White High Power LED: http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

1x Toggle Switch:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

1x 7.4V Li-Po Battery:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

1x Fuse (30A):http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

1x LM7805 (5V Regulator):http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

1x Crystal 16MHz:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

3x IRLZ44N N-Channel MOSFET:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

1x 2-Component Adhesive:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

1x 1µF Capacitor:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

2x 22pF, 3x 100nF Capacitor:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

6x 150Ω, 3x 680Ω, 1x 3.3kΩ, 1x 4.7kΩ, 4x10kΩ Resistor:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

10Ω (1/4W) Resistor as Igniter:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

Male Header:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

Female Header:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

1x Perfboard:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

10m 3x0.75mm^2 wire:http://rover.ebay.com/rover/1/711-53200-19255-0/1?...

Amazon.com

4x XT60 Male+Female Connector: http://amzn.to/1JQL5ig

1x ATmega 8-16PU: http://amzn.to/1i9IZBj

1x 28 Pin DIP Socket:http://amzn.to/1i9J3Rk

1x FTDI Breakout: http://amzn.to/1JQLgKi

1x HC-06 Bluetooth Module:http://amzn.to/1VKNHn8

3x 0.5W White High Power LED:http://amzn.to/1i9Jrzs

1x Toggle Switch:http://amzn.to/1VKO54X

1x 7.4V Li-Po Battery:http://amzn.to/1JQLKQF

1x Fuse (30A):http://amzn.to/1JQLP6Z

1x LM7805 (5V Regulator):http://amzn.to/1KYzDDr

1x Crystal 16MHz:http://amzn.to/1KYzHD3

3x IRLZ44N N-Channel MOSFET:http://amzn.to/1JQM9mk

1x 2-Component Adhesive: http://amzn.to/1VKOSDa

1x 1µF Capacitor: http://amzn.to/1KYBuYI

2x 22pF, 3x 100nF Capacitor: http://amzn.to/1KYBwzY

6x 150Ω, 3x 680Ω, 1x 3.3kΩ, 1x 4.7kΩ, 4x10kΩ Resistor: http://amzn.to/1KYBAzG

10Ω Resistor as Igniter:http://amzn.to/1VKP31f

Male Header: http://amzn.to/1i9Kuzk

Female Header:http://amzn.to/1VKPbO9

1x Perfboard:http://amzn.to/1KYDJeF

10m 3x0.75mm^2 wire: -

Wago Terminal: http://amzn.to/1KYDS1Q

Amazon.de:

4x XT60 Male+Female Connector: http://amzn.to/1LUS0HX

1x ATmega 8-16PU: http://amzn.to/1g6Wi3n

1x 28 Pin DIP Socket:http://amzn.to/1LUS3DD

1x FTDI Breakout: http://amzn.to/1LUS4HA

1x HC-06 Bluetooth Module:http://amzn.to/1f3nUyT

3x 0.5W White High Power LED:-

1x Toggle Switch:http://amzn.to/1vi1UsA

1x 7.4V Li-Po Battery:http://amzn.to/1LUSgGM

1x Fuse (30A):http://amzn.to/1LUSldz

1x LM7805 (5V Regulator):http://amzn.to/1LUSmyj

1x Crystal 16MHz:http://amzn.to/1LUSqOs

3x IRLZ44N N-Channel MOSFET:-

1x 2-Component Adhesive:http://amzn.to/1g6WEXG

1x 1µF Capacitor: http://amzn.to/1LUSygR

2x 22pF, 3x 100nF Capacitor:http://amzn.to/PD2jZj

6x 150Ω, 3x 680Ω, 1x 3.3kΩ, 1x 4.7kΩ, 4x10kΩ Resistor: http://amzn.to/1g6WLT3

10Ω Resistor as Igniter: http://amzn.to/1IVKFmS

Male+Female Header:http://amzn.to/1IMwUZK

1x Perfboard: http://amzn.to/1EMeDyA

10m 3x0.75mm^2 wire: http://amzn.to/1IVKTdC

Wago Terminal: http://amzn.to/1g6X1Bu

Amazon.co.uk:

4x XT60 Male+Female Connector: http://amzn.to/1EMl6Kb

1x ATmega 8-16PU:http://amzn.to/1g71lkl

1x 28 Pin DIP Socket:http://amzn.to/1EMlk3J

1x FTDI Breakout: http://amzn.to/1UyozCY

1x HC-06 Bluetooth Module:http://amzn.to/1g71rbL

3x 0.5W White High Power LED:-

1x Toggle Switch:http://amzn.to/1EMlAjf

1x 7.4V Li-Po Battery:http://amzn.to/1UyoI9k

1x Fuse (30A):http://amzn.to/1EMlGrd

1x LM7805 (5V Regulator):http://amzn.to/1g71B2V

1x Crystal 16MHz:http://amzn.to/1UyoJu2

3x IRLZ44N N-Channel MOSFET:-

1x 2-Component Adhesive:http://amzn.to/1IVOUyL

1x 1µF Capacitor: http://amzn.to/1IVOVTt

2x 22pF, 3x 100nF Capacitor:http://amzn.to/1PYRTf8

6x 150Ω, 3x 680Ω, 1x 3.3kΩ, 1x 4.7kΩ, 4x10kΩ Resistor:http://amzn.to/1NzxNJR

10Ω Resistor as Igniter:http://amzn.to/1XFOqb3

Male+Female Header: http://amzn.to/1GN5xMt

1x Perfboard: http://amzn.to/1TlDGwj

10m 3x0.75mm^2 wire: http://amzn.to/1XFOLKV

Step 3: The Wiring!

Here you can find the schematic and pictures of how my final circuit and wiring inside my project box looks like.

Step 4: Program You ΜC!

Use the Arduino IDE and my sketch to program your ATmega.

Step 5: Download the App!

Here you can download the .apk file for your Android phone or the .aia file to import the project in your account of the MIT App Inventor.

MIT App Inventor: http://appinventor.mit.edu/explore/

Step 6: Success!

You did it. You just created your own Remote Bluetooth Igniter!


Feel free to check out my YouTube channel for more awesome projects:

http://www.youtube.com/user/greatscottlab

You can also follow me on Facebook, Twitter and Google+ for news about upcoming projects and behind the scenes information:

https://twitter.com/GreatScottLab

https://www.facebook.com/greatscottlab

Share

    Recommendations

    • Metalworking Contest

      Metalworking Contest
    • Tiny Home Contest

      Tiny Home Contest
    • Fix It! Contest

      Fix It! Contest

    31 Discussions

    0
    None
    LokiG1

    1 year ago

    I've made this project, when it mesure with the voltmeter it show that it works but when I place a resistor to blow it up it does anything ? What can it be ?

    Thanks for your time.

    0
    None
    Pratyush007

    1 year ago

    Sir can u please send a same complete project. I want to bye a same project kit.

    0
    None
    Legolaszstudio

    1 year ago

    I MADE MY OWN PROGRAM!

    https://drive.google.com/open?id=0B_7DN-NFLZbyNUZCWXFBZnZfV2s

    0
    None
    Antonireykern

    1 year ago

    Will this work with a 12v Lead Acid Battery?

    0
    None
    JoelJ9

    1 year ago

    Will this project work with the HC-05 bluetooth module ?

    1 reply
    0
    None
    AndreasH17

    2 years ago

    Hi how can i unzip the .aia file because when i unzip it the usual way, then there is now .aia file in the folders. I'm using win 10

    Thanks already!

    0
    None
    LokiG1

    2 years ago

    There's a way to dowloand the wiring diagram in high quality to make zoom ?

    3 replies
    0
    None
    LokiG1GreatScottLab

    Reply 2 years ago

    Yes but when I donwload it and I make zoom is in poor quality and I can't read the values.

    0
    None
    GreatScottLabLokiG1

    Reply 2 years ago

    You can dowload it in its original resolution. It is not that hard.

    0
    None
    Zé MariaL

    2 years ago

    Hello GreatScott! Can I use an ATtiny85 instead of the ATmega 8-16PU? Thanks

    4 replies
    0
    None
    GreatScottLabZé MariaL

    Reply 2 years ago

    It is way harder to do because you need to create a serial connection to the bluetooth module through software.

    0
    None
    Zé MariaLGreatScottLab

    Reply 2 years ago

    Ok I will try in the breadboard. Thanks! And congratulations for your videos!

    0
    None
    StephanS2Zé MariaL

    Reply 2 years ago

    Yes, but you have less programming space and io pins to use. But it should be possible.

    0
    None
    rocketman221

    3 years ago on Introduction

    I would suggest getting a roll of nichrome wire (around 26 or 28 AWG) for the igniters. Wrap 3 turns tightly around the fuse and clip your leads on. It lights in less than a second and doesn't stink like a burning resistor.

    1 reply