Introduction: Simon Says 6 Leds
In this instructable i will show you how to put togheter a simon says game with 6 leds using a arduino. I started this project as a school project in the begining of this year (2014) and now i am finished.
It is a very simple game: It begins with that 4 LEDs will lit in a random order, then you are supossed to click on the button below the LED in the correct order. If the order is correct 5 Leds will lit in a random order, and it just keep adding a light every level untill you lose.
Material needed:
- Arduino (I used UNO)
- Bread board
- Jumper wires
- 6 LEDs
- 6 Push buttons
- 6 220 Ohm resistors
- Speaker
Step 1: Hardware Setup
Now we need to connect all the components to the right place. Connect it according the pictures.
Step 2: The Sketch
Here is the code I put it as a arduino file with coments so you know what happens in the code.
Attachments
Step 3: Final Result
Now you are finished and now u can custumize it with a box that I did or just have it as it is.
This is my first instructable so i hope you guys enjoyed it, feel free to give feedback etc.
Tags: Polhemskolan, Lund, Teknisk Specialisering, Teknikprogrammet, Arduino, Interactive Design, Interactive game, Simon says