Introduction: Solar Coke Light

About: I love electronic projects and anything to do with a robot. I still have a lot to learn and I love instructibles.

Just a random project I made out of stuff lying around the garage. Enjoy p.s this is my first instructibles so I hope it makes sense.

Step 1: What You'll Need

A glass coke or other glass bottle you can get these in bulk at Costco. A small solar light I salvaged the guts of a solar rock from the dollar store but any solar light will do. Please note it will be hard to find in winter you may have to get one online.
TOOLS : soldering iron or tape
A wire stripper or knife and a
Hot glue gun

Step 2:

this is the solar assembly from my rock i had to use my soldering iron to get it out.  you  then need to extend the wires to the led  so it will sit deeper in the bottle. then just hot glue it in place over the bottle and if you didn't brake anything it should work.

Step 3: End

congrats you did it if you have any questions or suggestion on the project  or my instructions please leave a comment and remember this is my first project so if i made a mistake please tell me. thanks for reading and hey you just made a project from the ground up.