Introduction: Super Simple Rubber Band Pen Gun
This rubber band pen gun is very simple and takes about 2 minutes to make!
Let's get started!
The Materials You will need are:
- 1 cheap ball point pen
- 2 rubber bands
Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.
Step 1: Take the Pen Apart
Remove the cap, cartridge, the end cap, and the plastic piece covering the writing end of the cartridge.
P.S.: You will only need the main tube and the cartridge. Discard the other plastic pieces.
Step 2: Attach the Rubber Bands
Hold one of the rubber bands on the top of the pen while wrapping the other all the way around it.
Step 3: SHOOT!!!!
Place the cartridge in the barrel and hold the end of the rubber band around it. Pull back and FIRE!!!
P.S.: Please do not aim the pen gen at someone else's face. It could seriously injure them.
Step 4: That's It!
I hope this project was very interesting for you!
There are many games you can play with the Super Simple Pen Gun!
Some examples are:
- Target practice
- Distance competition
- OFFICE WARFARE!!
Have fun and be safe!
Participated in the
Rubber Bands Challenge