Introduction: Wrench Ring
This is my first ible and an easy one. It's just a mechanics rench wring. Hope you like it as much as me.
Step 1: Tools & Materials
The donor wrench is a combination 1/4"
4" bench vise
2 pairs of 6" channel locks
12" channel locks
2" hose clamp & 3/4" pipe(emt)
Step 2: The Bend
I start with the wrench just barely in the vice and the large channel locks. Get the wrench bent into a C shape
Then I use the small channellocks to work the C into an O.
To finish it up I put the wrench around a pipe and the put a hose clamp around the outside and SQUEEZE. it's not really that hard.
Step 3: Voila
After about 20 minutes it makes for a killer ring!!