Writing Accessory for Netanel

705

7

1

Introduction: Writing Accessory for Netanel

project for fixperts

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1:

Step 2:

Step 3:

3D print the following file.
To change size, measure the hand and change in the open file.

Step 4:

Duplicate the 3d model from flexible polyurethane 60 shore.

Step 5:

Print the following shape in real size and cut the neoprene

Step 6:

attach the neoprene on the final model.

Step 7:

Sew the edges of the neoprene on the model.

Step 8:

Print the following shape in real size and cut the neoprene

(can be printed directly on neoprene according to colour).

Step 9:

Attach the snap fasteners on the neoprene covered model and on the hand cutout.

Step 10:

Attach the two pieces by snaps and it`s redy for use.

Be the First to Share

    Recommendations

    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Rope & String Speed Challenge

      Rope & String Speed Challenge
    • Wearables Contest

      Wearables Contest

    Discussions