Double Compartment Micro Tackle Box.

Introduction: Double Compartment Micro Tackle Box.

About: i like the outdoors and airsoft

Carrying around a big tacke box is hard work.Make that hard into easy work with this instructable.

Teacher Notes

Teachers! Did you use this instructable in your classroom?
Add a Teacher Note to share how you incorporated it into your lesson.

Step 1: The Supplies:

What you will need for this project:
- 2 Altoids things
- 1 Hot glue gun
- 1 Clothes pin
- Popsicle sticks
- Hot glue sticks (for the hot glue gun)
- 1 Sharpie marker

Step 2: Making the Hook Holders

(you can make what ever size you want). First put your supplies in neat order(like you would have walls). Then draw with the sharpie around your hooks.(Those will be the walls). Next, dump out every thing and cut your popsicle sticks to the same length as your lines. When you are done cutting all of your pieces glue them down. When they are all glued down do it to the other altoids can.

Step 3: Putting Them Together

When you have completed making the hook holders glue the 2 altoids cans together. Once that is all dry glue the clothes pin. Then put in all the lures and hooks inside and you can just clip it on your pants and you will be ready to go fishing.

Be the First to Share


    • Trash to Treasure Contest

      Trash to Treasure Contest
    • Rope & String Speed Challenge

      Rope & String Speed Challenge
    • Fix It Contest

      Fix It Contest

    5 Discussions


    10 years ago on Introduction

    will the glue be strong enough to hold the tins together?


    Reply 9 years ago on Introduction

    you could solder it or use rivets


    Reply 4 years ago

    I just soldered my tins together and it looks so beautiful... No more ocd on this project! just make sure to sand the contact areas and use flux and a torch


    10 years ago on Introduction

    the fish aren't going to see the glue! lol neat idea