carlsandra2005

GUIsliceBuilder can do other screens https://github.com/ImpulseAdventure/GUIslice/wiki/GUIslice-Builder

https://www.youtube.com/watch?v=I5-gq7J7lM4&feature=share

Added Bluetooth Serial Adapter (HC-05)for Pro Mini to set time and program the Nixie Clock by GreatScott!Also running aviateur17 NixieClock firmwarehttps://youtu.be/b4QSryVyDtMWire your cable like this instructable by Nathan Ramanathan, so it will reset the ardunio pro mini so it can program the HC-05 without you needing to push a buttonhttps://www.instructables.com/The-Multitasking-Final-Countdown-Timer-With-Wirele/Also Nathan Ramanathan has this excellent video showing you how to find the HC-05 com port.https://www.youtube.com/watch?v=QWMJGZ0nVv8BUT program the HC-05 to baud rate 57600Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328P 57600Program the Bluetooth HC-05 module like this instructable for the Pro mini.https://www.instructables.com/Bluetooth-Serial-Adapter-for-Pro-Mini/More…

Added Bluetooth Serial Adapter (HC-05)for Pro Mini to set time and program the Nixie Clock by GreatScott!Also running aviateur17 NixieClock firmwarehttps://youtu.be/b4QSryVyDtMWire your cable like this instructable by Nathan Ramanathan, so it will reset the ardunio pro mini so it can program the HC-05 without you needing to push a buttonhttps://www.instructables.com/The-Multitasking-Final-Countdown-Timer-With-Wirele/Also Nathan Ramanathan has this excellent video showing you how to find the HC-05 com port.https://www.youtube.com/watch?v=QWMJGZ0nVv8BUT program the HC-05 to baud rate 57600Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328P 57600Program the Bluetooth HC-05 module like this instructable for the Pro mini.https://www.instructables.com/Bluetooth-Serial-Adapter-for-Pro-Mini/More reading if you need it!https://sites.google.com/site/wayneholder/inexpensively-program-your-arduino-via-bluetoothNixieClock firmware I used in the video NOTE: you need to connect the A7 pin to A3 for this firmware. (Not pin 1 (TXT) as in original firmware by GreatScott!aviateur17/NixieClockhttps://github.com/aviateur17/NixieClock

I had the same issue, tube 3 would not show 1 or 2 , after hours of trouble shooting, I tried another Pro mini and problem fixed. so most likely you have a bad pro mini.

do yo still have your source files and grbl files ? cmshelton2010@gmail.com Thanks

They do this with steam and vacuum , on cycles like . Search for yamaha guitar company patent.

Look here. https://maestronet.com/forum/index.php?/topic/332885-torrefied-tonewood/

Looks to me like taskarduino just used this to get people to his site, this miss leading indestructible most likely did more harm that goodjust try this clock from herehttps://circuitdigest.com/microcontroller-projects...

amandaghassaei Thanks for you instructable , My question is, I trying to use arduino (mega perhaps) or maybe more than one arduino to use to analyze a violin vibrations, my goal is 10 to 15 sensors to detect how the violin vibrates at different locations when the bow is drawn on any one string, say the G string. the purpose is to be able to build a good violin from the reading of a Master violin ( stradivarius etc..) maybe you can point me in the right direction. thanks again for any adviceAlso you can use Telemetry by farrellf to veiw your data outputhttps://www.youtube.com/watch?v=lFZ26gD7OIE

pre compiled jarhttp://www.farrellf.com/TelemetryViewer/

latest versionhttps://www.youtube.com/watch?v=yYyW16FYqE0

Look great

Awsome Thanks, that worked ..

@BoianMhow is the best way to Celsius to FahrenheitCelsius to Fahrenheit