Introduction: Pvc Crash Test Dummy

By
About: Hi, my name is SQuiD people actually call me that in real life (but its just a nickname). People se me as strange and weird (rather be strange and weird than normal right?) I enjoy making things and showing pe…

The perfect subject for all of your expieriments can be made with this instructable.

Step 1: Arms,legs,and Body

Step 2: Joints

Step 3: Drill the Holes

For the body , drill 4 holes (2 on each side). For the arm and leg pieces drill 1 hole.

Step 4: Put the Rope Through the Holes

Just feed them through until both sides are equal.

Step 5: Put the Arms On

Step 6: Do the Same on the Bottom

Step 7: Head

Drill one hole

Step 8: Neck

No particulare size.

Step 9: More Holes....

Put one more hole in the back.

Step 10: Tie the Head On

Feed the rope through the head and tie a knot on the inside , then tie a knot on the back. Trim the excess rope.

Step 11: Face

Cover the open end in duct tape.

Step 12: Face

Draw your own!

Step 13: Final

Put the face on and then your done, a perfect crash test dummy made for all your expiriments!!

thanks for looking bye.