Introduction: Ring Out of a Coin

About: my name is luuk, dutch boy, i can make all kind of things out of random stuff :p

previous months i was trying to make a ring with diferent materials and diferent tools .
my last try finaly worked, yes i made a ring out of a coin :)

Step 1: Making the Outside

you can choose to grab a hammer and make the side of the coib thicker, i didn't do that because i didn't really like it . it is up to you.

if you use a hammer, it will take some time!

Step 2: Drill the Inside

now drill out the inside, make the hole as big a.p (make sure you know the size it needs to be before you drill the hole) i used a small drill, bad luck it broke. the bigger ones wont have a problem going trough

Step 3: Making It the Right Size

now you can use some tools to make the hole bigger.

Step 4: Finishing Touch

i stuck some sanding paper to a small motor and a 9v batery and i created my own little machiene. (i was kinda too lazy to do it with my hands :'D) btw i made the ring for someone with smaller fingers

Step 5: Ready to Go

thanks for reading and i hope you like it :'D