Introduction: Introduction

Picture of Introduction

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

Project Overview:

Test your 3D modeling skills in this project and create a Spaceship!

Step 1: Overview

Picture of Overview

This lesson will challenge you to use all of the tools you have learned from previous lessons. You will be introduced to the following new tools and features:

  • Mirror
  • Snap Grid

When making something from imagination, it can be challenging to create it in 3D from the start. Try drawing out your ideas on a piece of paper first. The drawings don't have to be perfect. The goal is to explore and have a better understanding of how it will look and how you can begin building it in Tinkercad.

In the next lesson you will learn to make the ship body!

Next Lesson:Making the Body

Comments

About This Instructable

60views

4favorites

License:

More by tinkercad-support:Move Circuit AssemblyGlow Circuit AssemblyTurn Your 3d Design Into Buildable Brick Models Using Tinkercad
Add instructable to: