With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
How to disassemble and clean a starter motor for a Toyota 22R engine
Thank you! I've had my Lincoln 225 buzz box since 1968, it never failed until yesterday. I followed your lead, removed a very large mouse nest, but my welder is now responding like the day I bought it. Great post, don't lnow the age of yours. Mine looks exactly the same
How to fix your 12v air compressor
How to polish a Lexan windshield for under $4
Busted Ipod click wheel connector fix
Refreshing your Lincoln AC-225 220V tombstone welder
I could not get those deep screws out with a Number 3 Phillips screw driver, but was able to get them out fairly easily with a 9mm socket spanner!
Thanks for this, my compressor has a reed valve inlet on the piston which had broken off, I was able to quickly cut a new one from a pop can and get the compressor working again. With the gunk out of the cylinder it worked much faster than I was used to also.
I needed to replace the plastic piston ring and came across this website. My requirements were for a 0.750" OD, 0.500" ID, 0.031" thick "piston ring". However, I was not content to use a teflon faucet washer that would require trimming. I did a bunch of online digging and came across this website:www.superiorwasher.comand found this product (T24-750031N-Pkg) which was EXACTLY what I needed.... up and running flawlessly.
I found a website that sells Teflon Washer and they were the perfect fit for me. 0.750" OD, 0.500" ID, 0.031" thick. Installed and running perfectly.www.superiorwasher.comT24-750031N-Pkg
Failed attempt to wire bridge a connector to a motherboard
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.