Introduction: Camera Slider Dolly DIY With a Laser Cutter

About: Invention Therapy is the show where we teach you how to get those invention ideas out of your head and turn them into a reality.

This is a really interesting and useful build for anyone who shoots movies or video. Our camera dolly slider is a great cinematography accessory that should be part of every photographers equipment list. Total build cost is less than $15.00!

The INSTRUCTIONAL VIDEO is fun to watch!

Be sure to SUBSCRIBE to Youtube Channel HERE

Step 1: Things Needed for This Build

1 piece 4' X 2' .188" (5mm) MDF

2 pieces 48.0" long, 1.0" diameter wood dowel

8 pieces R8 (6mm ID, 22mm OD) roller bearings

8 pieces #10-32 machine screws

8 pieces #10-32 nuts

24 #10 washers

wood glue

Step 2: Laser Cut All Parts

Download and laser cut these parts from .188" (5mm) MDF.

The MDF we use is available at your local home store. It is labeled as chalkboard (black) or dry erase board (white).

Step 3: Assembly Instructions

All assembly instructions can be viewed in our video.