D.I.Y. Gear Ties

Introduction: D.I.Y. Gear Ties

About: I'm a machine mechanic. My interests are very broad. I'm a skilled archer and marksman. I'm on an airsoft team, I specialize in stealth. I have experience in boxing, wrestling, judo, Brazilian jujitsu and a bi…

This guide will show you how to make super simple gear ties. These are cheap and effective ways to attach gear to packs when molle and alice aren't available. It's pretty much a heavy duty bag tie.

Supplies:
-Bailing wire
-1/8" heat shrink tubing

Tools:
-Pliers
-Lighter

Step 1: Assembly

Slide the heat shrink over a fairly straight piece of wire. Gingerly heat the tubing until it's hugging the metal. Cut the wire to length. Done.

Be the First to Share

    Recommendations

    • Plywood Challenge

      Plywood Challenge
    • Battery Powered Contest

      Battery Powered Contest
    • Plastic Contest

      Plastic Contest

    3 Discussions

    0
    KVSBUNNY
    KVSBUNNY

    3 years ago

    I could use these, roughly what gauge is baling wire?

    0
    Skwurlito
    Skwurlito

    Reply 3 years ago

    This is what I used.

    temp_1976643103.jpg
    0
    Skwurlito
    Skwurlito

    Reply 3 years ago

    I used 18ga. but you could use anything you can twist. The wire is a lot easier to use by hand with the soft coating.