DIY Jewelry Hanger

Introduction: DIY Jewelry Hanger

DIY jewelry hanger made by all recycled & found materials.

Step 1: Step 1

I used a piece of compressed wood wraped some old wallpaper I had. I used scraps of wood & hot-glued them to the wraped board. I nailed 2 inch nails to the bottom of the scaps to function as hangers.

Step 2: Step 2

I used a staple gun to fasten a Coke tap to the back of it to hang on the wall.

Step 3: Step 3

The final product.

Be the First to Share

    Recommendations

    • Plywood Challenge

      Plywood Challenge
    • Plastic Contest

      Plastic Contest
    • Battery Powered Contest

      Battery Powered Contest

    3 Discussions

    A really nice idea, I thought of using small brass hooks instead of nails - I found some about 1/2" long inside an old cupboard in a skip (dumpster?)
    The wood scraps are very effective. Well done!

    0
    dvnlilly
    dvnlilly

    Reply 8 years ago on Introduction

    Thanks so much. It only took about 30 mins to build & it's really helped me organize all of my jewelry. Before this I had no system of organization so it's helped tremendously.