Fly the TriFin!

Introduction: Fly the TriFin!

Here is a nice simple plane for you to fly!

First, print off the template here at

or look at the whole design here at

Step 1: Step 1

Take the template, get some clear tape and a pair of scissors and a paperclip.

Step 2: Step 2

Start with the paper as shown.

Step 3: Step 3

Fold back along line "A".

Step 4: Step 4

Fold back along line "B".

Step 5: Step 5

Fold back along line "C".

Step 6: Step 6

Fold back along line "D".

Step 7: Step 7

Fold in half along line "E".

Step 8: Step 8

Cut out along the curved line "F" and recycle both scraps of paper.

Step 9: Step 9

Fold the top wing and tail down along line "G" to the left.

Step 10: Step 10

Fold up the tail along line "I".

Step 11: Step 11

Flip over and fold the other wing and tail to the right along line "G".

Step 12: Step 12

Fold up the other tail along line "I".

Step 13: Step 13

Pop up the middle tail along sections "H".

Step 14: Step 14

Put a paper clip on the nose.

Step 15: Step 15

Place a piece of clear tape on the paper clip to hold it in place.

Step 16: Step 16

Straighten out the wings and FLY!

If you want more FREE paper airplane designs, check out

The Online Paper Airplane Museum at

for over 800 FREE paper airplane designs.

Grab some paper and have some fun!

Be the First to Share


    • Teach With Tinkercad Contest

      Teach With Tinkercad Contest
    • Fandom Contest

      Fandom Contest
    • Halloween Contest

      Halloween Contest



    14 years ago on Introduction

    Nice plane!

    R/C plane fan! >
    Add a lipo battery in the middle crack, add a tiny zipzap(or servo with 360* modification) motor on each FRONT wing, and your receiver almost in the back. it do a very well flight! and its quick !


    Reply 14 years ago on Introduction

    Could not edit. use a clear tape on them, they hold enough to do 3-4 fly!