Hidden Blade - Assassin's Creed Inspired

Introduction: Hidden Blade - Assassin's Creed Inspired

Hey there I've been working on a this project on and off this summer. (mostly this fall)

As you can see it's A hidden blade, I started with a ,desk drawr slide ,some sheet metal (For the blade and part of the trigger mech) ,a few nuts and bolts ,and some thick steel wire. also a paper clip or 2 bent into some small springs.

I'll be building 1-2 more after i finnish this one i'll be making an instructable for those. This one's kinda the test dummy.

Be the First to Share

    Recommendations

    • Make it Glow Contest

      Make it Glow Contest
    • First Time Author Contest

      First Time Author Contest
    • Microcontroller Contest

      Microcontroller Contest

    32 Comments

    0
    McJarod_ImLovinIt
    McJarod_ImLovinIt

    5 years ago

    great for a prop, but sheet metal is NOT ideal for blades, too flimsy and very likely galvanized. if you are into actual knife making, and you have a forge or propane torch try heat treating with some higher carbon steel, this will harden it. but never forget to temper it as well

    Nice build here. Similar to mine I think

    https://m.instructables.com/id/Assassins-creed-hidden-blade-10/

    0
    Quintus19
    Quintus19

    Reply 5 years ago

    i agree

    0
    amcmorris1
    amcmorris1

    8 years ago on Introduction

    I've been trying to make a hookblade (without the blade) for ages, I would use it as a climbing hook for Parkour.. can someone give me some help?

    0
    the shadow creed
    the shadow creed

    Reply 6 years ago on Introduction

    dude id love to help it seems pretty easy just do everything that the hidden blade has to have but then weld a peace of bent metal at the end

    0
    yourallygod
    yourallygod

    Reply 5 years ago on Introduction

    well you need the hook to be durable for the pulling and all that the actual thing will need to be able to withstand and hold human weight along with the fact that it would need to not fall off so it is pretty difficult to make the hidden hook blade thing :P

    0
    the_burrito_master
    the_burrito_master

    Reply 8 years ago on Introduction

    well firstoff i would never parkour with this hidden blade on my hand letalone a hook blade. just cause in the game it can be used effectively doesn't mean it would be in real life tie something rigid on your arm tight enough to hang from next time you do parkour and see how it works out for you. why not make a hook that you can hold on to? and an extended reach isn't always something you want for parkour it would really hinder actually getting up onto a ledge.

    0
    the_burrito_master
    the_burrito_master

    Reply 9 years ago on Introduction

    Not really... nothing eve locks the blade forward at this point it's fun to pretend to stab yourself case the blade retracts right in.

    0
    Luca Vermeer
    Luca Vermeer

    Reply 7 years ago on Introduction

    just don't try carving with it. that would be funny! :P

    0
    xxDarkk
    xxDarkk

    7 years ago

    So does it retract without you having to push it in with your hand?

    0
    the_burrito_master
    the_burrito_master

    Reply 7 years ago on Introduction

    You must push it back in with your hand after releasing a forward locking mechanissam

    0
    Dzucky
    Dzucky

    8 years ago on Introduction

    you should do an instructable for the hookblade now :)

    0
    sonnytunrer13

    you guy are all retarts it not dangerous it cover his wrist so it will not get cut and it wont stab his palm because it only activated when he move his palm back der