Introduction: How to Program Led Strip With Trinket Pro

About: Mechatronics Engineer. Imagination is more important than knowledge. #Tinkering

This is a tutorial to program led strip with trinket pro.

Step 1: Materials

The materials are:

  • Trinket pro 5v.
  • Usb micro-B plug.
  • Wires.
  • PC.
  • Led strip.
  • Battery 3.7 - 5v.

Step 2: Connect

Take to wire and connect the power.

Step 3: Connect 2

We proceed to do all the connections like we see in the picture.

Step 4: Bootloader

Now we put the trinket in bootloader mode and upload the program.

The program can be download here: https://learn.adafruit.com/adafruit-neopixel-uberguide/basic-connections

Step 5: Led Strip

Connect the led strip to the board.

Step 6: Battery

Disconnect the cable and connect the battery.

Step 7: Final

Finally we can see the led strip is turn on.