Introduction: IKEA Hackers: MARIUS Street Sign Side Table
More by the author:
About: Swiss expat in Germany, husband, father, teacher, cyclist, tinkerer, former theatre propsmaster 🇨🇭 🇩🇪 👨👩👦👦 👨🏫 🚲 🛠️ Heimwehschweizer in D, Ehemann, Vater, Lehrer, Radfahrer, Bastler, Ex-Requisiteur
This hack is very straight forward:
Drill four countersunk holes into the street sign (use the original seat as template)
Assemble the legs and bend them a bit outwards (makes it a bit more stable)
Mount the sign onto the legs, using the four round plastic parts as spacers.
Done!
Tools needed:
Power drill with drill bit (5mm)
Screwdriver
fork wrench
tapemeasure
Materials needed:
MARIUS stool from IKEA
street sign
screws and washers
Drill four countersunk holes into the street sign (use the original seat as template)
Assemble the legs and bend them a bit outwards (makes it a bit more stable)
Mount the sign onto the legs, using the four round plastic parts as spacers.
Done!
Tools needed:
Power drill with drill bit (5mm)
Screwdriver
fork wrench
tapemeasure
Materials needed:
MARIUS stool from IKEA
street sign
screws and washers
Participated in the
Guerilla Design Contest
