Introduction: Ironic Mustache Twitter Interface
This interface is really cool but you've probablly never heard of it.
The IMRI seeks to create a twitter experience like no other, and tickle your mustache at the same time. Using space age technology, you too can know the moment someone is talking about staches on the twitterverse. Everytime someone tweets out #mustache, your mustache will vibrate, telling you exactly when someone is talking about mustaches.
Perfect for those hipsters who have everything.
Step 1: Stuff You Might Need If You're Cool Enough
A fake mustache, or a real one that you ripped off your face
vibrating pager motor
a retro arduino board
sweet programming skills
Old drinking straw
some solid core wire
Not necessary but you're a total poseur with out it:
a case of PBR brah!
Step 2: Putting the 'stach Together
First you gotta make the 'stache vibrate.
Solder some wires to your motor so you can attach it to the arduino easier. I used small solid-core, but this is a free country DO WHATEVER YOU WANT!
PROTIP: use your lighter to strip off the small wires. The plastic will just crumble off. Once your done you can use your lighter to light your american spirit cigarette. What? you're still smoking camels? how lame.
Next i took a drinking straw and put it around the motor, i did this because the stache' hairs get caught in the motor otherwise.
Lastly i took some hot glue and told that motor whos boss, but attaching it to the stache' Celebrate by throwing on some MGMT on that vintage ipod from 2006
Step 3: Code the 'Duino and Computer.
I explained this in more detail in My Twittering coffee pot instructable, check that one out if you're having trouble
Python is mad fresh, Here's the code for that. Just run in a terminal on your Computer:
The Python using the Python-Twitter Library searches recent tweets with #mustache and then gives a signal to serial to interact with the arduino. While this code is running your arduino along with mustache module should be connected.
The arduino code is here, to be uploaded to your arduino:
Once all that is done, you should feel the tweets pour in.
Step 4: Hooking It Up
Wire it all together, run the code on your computer and arduino and you're done.
You now have the dankest vibrating mustache in the land, and you can know exactly when someone it talking about a 'stache on the twitterverse.
Hope you had fun, i'm out, i gotta alleycat dive bar race to go to.