Leather Dairy

You can have this acrylic pattern from here:

http://www.leathercraftpattern.com/leather-acrylic...

The finished size is about: 7.9" x 5" x 0.8" (20cm x 12.8cm x 2cm)..

Hardware: A6 size loose leaf binder x1, 10mm x 8mm Chicago screw or rivet x2, A6 size file keeper x1, A6 refill page x2.

Leather: We advice 2.0mm (5oz) leather for surface, size 20cm x 27cm, 1.0mm(2.5oz) leather for lining, size 31cm x 8cm.

Tools: If you are a new leather player, try to considerate to have tool kit here: http://www.leathercraftpattern.com/leather-tools-...

Step 1: Draw Cutting Lines by Awl on Leather Use Acrylic Pattern.

Step 2: Cut Leather Pieces Off, Shoot Loose Leaf Binder Holes.

Step 3: Sew 2 Lining Leather on Surface Leather's Flesh Side.

Step 4: Install Loose Leaf Binder With Chicago Screws.

Step 5: Add File Keeper, Clapboard, and Refill Pages On.