Easy DIY Kids Spinning Toy

12,111

20

2

Introduction: Easy DIY Kids Spinning Toy

About: Stephanie shares DIY Projects, woodworking plans, room makeovers, remodeling, and craft projects. Her posts focus on remodeling, decorating, or furnishing a home in a stylish and affordable way.

I recently saw a grown-up version of a Sit & Spin Toy on Pinterest. It got me thinking about how easy it would be to make one for my boys. And since I already had Lazy Susan hardware waiting for a purpose, I was half way there. After playing around with the design for a few weeks, I’m ready to share it with you guys. And it’s a super easy DIY kids toy that you can make in a day. Yea!

I love the idea of making a couple heirloom kids toys that will last for generations. My grandfather made a cool board game that I loved as a kid. And I just thought that he must be nearly magical for being able to make it. I still get nostalgic when I see it. So, I hope the kids in your life will look at you the same way when you make this.

And, the best part is the custom paint job. I made this Sit & Spin toy 2 ways. Once with a sweet medallion pattern and once with a cool Captain America paint job for my boys. Pick your kids favorite cartoon, toy, movie, game, candy, etc. and have fun with the design. As always, I’d love to see what you come up with.

Materials:

This project is actually really simple. The longest part is the paint job and waiting for all the layers to dry.
1. 2 store bought 18" wood rounds

2. 1 6" square Lazy Susan Hardware (aff)

3. 1 8" metal pipe

4. 2 flanges

5. 3/4" thick piece of wood cut to 7" diameter.

Mostly store bought with just a little jigsaw and drill work. Easy!

Step 1: Prepare the Rounds and Wheel

Find the center of the top round and use your drill and jigsaw to cut a 1 1/4" hole.

Cut a 7" round wheel with 3/4" thick wood.

Step 2: Install Lazy Susan Hardware

You can see how I install the hardware in the YouTube video.

Please note, I tested 3 different Lazy Susan’s. I hoped the 12″ round hardware (pictured earlier) would help distribute the load for older kids, but it shifts too much to work for my design. The hole for the pipe would have needed to be quite large, due to the shifting inside the ring. I had to switch back to a 6″ square.

Step 3: Complete Your Custom Design Before Assembling.

Now finish your paint job before assembly. I created a Captain America Shield printable you can download on my site for free to make this design.

Cut the star and white ring out of the printable. Then trace around them with pencil. Fill that in with white primer, so that the dark colors don't bleed through.

Step 4: Assemble the Toy Sit & Spin

After painting is complete, apply super glue to the threads on one end of the pipe. Screw the pipe into the bottom flange. Attach the other flange to the center of the bottom of the wheel. Apply super glue to the top threads of the pipe, and screw the wheel in place.

The super glue keeps the kiddos from unscrewing the toy while spinning. This design was made with a stencil.

Step 5: Enjoy the Finished Toy.

Get the full details and free Captain America Shield printable for this DIY on my site.

Be the First to Share

    Recommendations

    • Plastic Contest

      Plastic Contest
    • The 1000th Contest

      The 1000th Contest
    • Battery Powered Contest

      Battery Powered Contest

    2 Discussions

    0
    Phantomjerret
    Phantomjerret

    3 years ago

    FIDGET SPINNER lol