Introduction: Multifunctional Hanger
University students tend to store laundry.
Therefore, when drying laundry, the space for drying may not be enough.
In that case, you cannot hang and dry laundry sufficiently.
To prevent this situation, we invent more efficient hanger.
If you use this hanger, there are the following advantages
(a) Use vertical space efficiently
(b) Hang some laundry together
e.g. shirt and socks, pants, towel
(c) fastener is removable
(d) adjust hanging height is adjustable
While this hanger have such advantages, it can be made very easily.
Step 1: Prepare Materials (How to Make)
・clothes pin ×2
・removable fastener ×2
Prepare for a hanger, vinyl string, two clothes pins, two removable fasteners, pen, ruler and scissors.
You can choose any type hanger, but you should choose fasteners which is removable.
Step 2: Cut
Cut the vinyl string into about 70 cm.
According to your height, you can adjust the length.
If you don't know the length, you should cut it longer.
Step 3: Mark Line
As a standard of length, make marks on vinyl string each 5 cm.
There are these marks to adjust length.
If you don't need it, it is not essential.
Step 4: Tie Vinyl Tape
Tie one end of the vinyl string to the clothes pins and the other end to the fastener.
Step 5: Repeat
Repeat steps 2 to 4 one more time.
Step 6: Completion
Install the fasteners which are tied with the vinyl string on the hanger.
Step 7: Supplementation
If you wind the vinyl string inside the fastener, they can be fixed on the hanger and you can adjust the length of the vinyl string, at this, refer to marks in step 3.
Step 8: Conclusion
These are the sample photos from the uploader.
If you are interested in this, please have a try.