Introduction: My Desk Needs an Amiga

About: I am a designer and a developer from Italy. Currently I live in Berlin

My desk is quite nice-looking, I have to admit.
Anyway, I wanted to add an Amiga 1200 to it.
Before starting this project, the Amiga was on a separate desk (with its own TV).

It was quite difficult to realize this desk while keeping it nice-looking.

I hope you enjoy it and use her as an inspiration. 

Step 1: Change the Cable Holders!

Thanks to a user who commented my previous desk, I changed my cable holders.

The previous ones were nice, but a bit too "rigid" for my tastes.
So IKEA came to help once again: GUNSTIG!
The material was perfect for my needs, very flexyble, cheap and capable to hold cables.

Step 2: Raise Up the Shelf

Next step was to raise up the shelf.
That was necessary because the Amiga is too high to suit in the actual shelf.

I took advantage of the situation and gave some "air" to the soundcard, which is good for cooling and cables managment.

Step 3: Make the Amiga Power Supply Nicer

That was absolutely necessary :)

I love Amiga, really. I think that it has the most beautiful microcomputer models ever made.
Anyway, the power supply is not so nice, and the cable that comes out from the front...

The renovation was simple. I replaced the button with a nicer one and I placed both cables to come out from the rear.
Et voilà!

Step 4: Place the Laptop Stand

To place the laptop on the desk, I used my old table stand.
I just flipped that and fixed with some nails to the bottom of the shelf.

This placement is a lot more practical than the previous one.
(Before, the shelf was too low and there was no space to attach and detach cables) 

Step 5: The Competition Pro

I have a Competition Pro Joystick.
That is absolutely fantastic, but I think you know that... :)

I placed a broom holder on the right side of the desk. It works so well as joystick holder.