Introduction: OodAmmo Slingshot [Oblivitus]
This is Oblivitus' Oddamo Slingshot.... all credit to him :)
So just watch the video and that will explain everything.......
Remember to check you Oblivitus' channel: https://www.instructables.com/member/Oblivitus/
Also if your subscribing to me subscribe to him. :D
So lets get building!!!
So just watch the video and that will explain everything.......
Remember to check you Oblivitus' channel: https://www.instructables.com/member/Oblivitus/
Also if your subscribing to me subscribe to him. :D
So lets get building!!!
Step 1: Barrel
This should be easy.
Remember to add in the blue and yellow rods where shown.
Remember to build *2* but only one with the rods connected then when the two have been built connect them together!
Remember to add in the blue and yellow rods where shown.
Remember to build *2* but only one with the rods connected then when the two have been built connect them together!
Step 2: Stock
Again just follow the notes.
You need to build *2* of these, And connect them together with blue rods.
Step 3:
You need to blue four of those band holders. You also need 6 blue spaces.
Should be easy.
Should be easy.
Step 4: Mag
This is the part where the trigger and ammo goes.
Step 5: Trigger Mech and Holder.
This will teach you to build the trigger mech and its holder. Remember to build 2 holders. You need to build the trigger and leave it to the side untill it get's put together.
Step 6: Handle.
Do not connect the handle yet. The next step will show you how. This handle is different to the original but I chose to build it like this because it's lighter and just as strong.
Step 7: Connecting.
This step is showing you how to connect everything together.
Picture 1: Stock & Body and barrel,
Picture 2: Mag & Body,
Picture 3: Trigger & Trigget holder and Mag,
Picture 4: Butt of the stock.
Picture 1: Stock & Body and barrel,
Picture 2: Mag & Body,
Picture 3: Trigger & Trigget holder and Mag,
Picture 4: Butt of the stock.
Step 8: Elastic Bands.
Place the bands like this on the band holders.
Step 9: Mods
These are a few mods I came up with whilst toying with the gun making it better.
Picture 1: Stops the oodammo flicking upwards.
Picture 2: Safety catch. Slide it in and out to make it work.
Picture 1: Stops the oodammo flicking upwards.
Picture 2: Safety catch. Slide it in and out to make it work.
Step 10: All Done!
Well done! You've got this far so go outside and have some fun! Remeber dont shoot any animals or people! I dont take any responsiblity for anything you break injure or kill,
Speacial thanks to OBLIVITUS visit his channel and drop him a comment : https://www.instructables.com/member/Oblivitus/
Thanks!
Speacial thanks to OBLIVITUS visit his channel and drop him a comment : https://www.instructables.com/member/Oblivitus/
Thanks!