On My Own Skatebaord

Introduction: On My Own Skatebaord

This is one of the most basic skateboard model, sparrow is small, but all dirty, I put the center of gravity on the frame linkage construction, if there are like friends can agree with it!

Step 1: Step One Making Wheel Racks

Design the stand and wheels of thebottom wheel of the skateboard according to the actual style of the skateboard

Step 2:

1.Makea skateboard with a length of 276.5, a width of 60 and a height of 11.4, of which the thickness of the skateboard is 7,
2 . The left and right are connected to each other with a shaped shape of the medium plate and grouped

3 .Drilling on a skateboard

Step 3: Step 3, Stitching Molding

1.Align the screws on the frame with the screw holes on the skid frame and stitch up the screws

Skateboard Contest

Participated in the
Skateboard Contest

Be the First to Share

    Recommendations

    • Arduino Contest

      Arduino Contest
    • Colors of the Rainbow Contest

      Colors of the Rainbow Contest
    • Box Challenge

      Box Challenge

    Comments