Introduction: PVC Speaker
Making a PVC speaker is a very simple task. It takes very little effort to help boost the loudness of your phones speakers. Here is an easy way to make a speaker that won't break the bank, but will give you a little extra sound out of your phone.
Step 1: Step 1: Get Your Materials
When making this, you will only need 3 or 4 things:
piece of PVC (around 10")
Two 90 degree bend PVC pieces
And any tool that you can find to cut out the hole big enough for your device
Step 2: Making the Speaker
To make the speaker, just follow these steps.
1. Take PVC pipe and connect two 90 degree bends to the ends.
2. Trace around your phone on the PVC pipe so you know where to cut
3. Cut hole for phone out
4. Put your device in and enjoy some music!
It's just that simple! :)
Participated in the
PVC Contest 2017