Project ROBOT: Part I

Introduction: Project ROBOT: Part I

About: Hi! I'm Andrey, 20 y.o. and I'm studying industrial electronics at the NTU "KhPI". Wellcome to my Instructables-page, hope you'll find here something interesting and helpful! 💥🤖When I get 100subs on…

Hi! In this instructable I will show you how to make an Arduino 4wd robot. In this part we will talk about the platform for the robot.

Step 1: Make a Draft

I've had such a platform (a smaller one) and decided to make something bigger, so I drew a draft of the platform that I'd like to have. You can see it in the second picture. Not really beautiful. And not really ugly. That's ok.

Then you will need to take a sheet of plastic, glue the draft to it, cut everything out and drill the holes.

You will get something like a platform in the 3rd picture.

P.S. You can see the whole video by this link:

P.P.S. Subscribe)

Step 2: Connect Everything to the Platform

Now we are taking everything and connecting it to the platform with the help of plastic buckles.

Step 3: We're Done!

We have made something like this! Congratulations!

In the next part we will talk about the electronics.

Thank you for reading this instructable!

See you soon! Bye!

P.P.P.S. You can also subscribe for more videos - https://www.youtube.com/channel/UC84lODzF_czXKVoNp...

Be the First to Share

    Recommendations

    • 3D Printed Student Design Challenge

      3D Printed Student Design Challenge
    • Space Contest

      Space Contest
    • Robots Contest

      Robots Contest

    Comments