Introduction: Project ROBOT: Part II
Hi! This is the second Instructable og making an Arduino 4wd robot.
In this part we will talk about the electronics.
P.S. You can see the whole process of making this robot by this link:
Step 1: Components
You will need:
- jumper wires
- HC-05/HC-06 bluetooth module
Step 2: Circuit
Now connect everything like it's done in the schematics. You will get something like this.
Step 3: We're Done!
We have made something like this! Congratulations!
In the next part we will talk about programming.
Thank you for reading this instructable!
See you soon! Bye!
P.P.S. You can also subscribe for more videos -