Replacing an Engine Mount (Hyundai Trajet)

Introduction: Replacing an Engine Mount (Hyundai Trajet)

As part of the proactive maintenance program for vehicles, I went about replacing the 16 year old front mount in this Hyundai trajet.

Step 1: Removing the Old Mount.

The mount is held by four 14mm bolts. I used powerlube 5 Minutes prior to removal to make my life easier. I need a really long socket extension to remove the bolts.

In 10 minutes I had the old one out.

Step 2: Comparison.

The old mount is in pretty good shape but it's still old and the new one will be in shortly.

Step 3: Installing the New and Completion!

The installation is the reverse of removal. Pretty straight forward 20 minute job!

Be the First to Share

    Recommendations

    • Make It Modular: Student Design Challenge

      Make It Modular: Student Design Challenge
    • Tinkercad to Fusion 360 Challenge

      Tinkercad to Fusion 360 Challenge
    • Digital Fabrication Student Design Challenge

      Digital Fabrication Student Design Challenge

    Comments