Introduction: Saw Guide
Simple saw guide to quickly make square cuts with a hand saw.
Step 1: Wood
Cut two pieces of wood to form the handle and guide.
Step 2: Glue
Glue and clamp the pieces at a perfect 90 degree angle.
Step 3: Screw
Reinforce with screws.
Step 4: Magnets
Drill holes and epoxy magnets in place along the saw guide edge.
Step 5: Test
Make a cut with the jig and test for square.
![MacGyver Challenge](https://content.instructables.com/FZ9/RCNN/J5MQ6R4E/FZ9RCNNJ5MQ6R4E.jpg?auto=webp&frame=1&width=320)
Participated in the
MacGyver Challenge