Simple 3-D Printable 2 in 1 Bracelet and Arm Warmer

This is a 3d printable fabric that is very easy to 3d print and can actually keep you warmer! This works because the fabric is covering your veins in your wrist keeping it protected from wind chill and scrapes! The link to download the fabric is www.thingiverse.com/thing:3290285

This is literally the best thing I have made yet!

Supplies

3-D printer filament

3-D printer

shoelace ( Or something similar)

Step 1: First Print the Fabric

Make sure the fabric is flexible and strong!

Step 2: Grab a Shoelace or Something Similar

Make sure that whatever you chose that it can fir through the holes in the fabric!

Step 3: Put It Through

Put whatever you chose and fit it into the holes on the fabric and tie them off when you make the knots.

Step 4: Trim

Trim the excess off the knots until you feel happy with the results!

Step 5: Have Fun

Have fun with your result and happy making! I would be very appreciative if you voted for this project and gave it a like! Thank you!