Introduction: The Golden Egg | Update

In this Instuctable I updated a previous project of mine. Here is a link towards that Project:

Step 1: Things You'll Need

For this project I used:

- Arduino UNO

- Adafruit NeoPixel Ring - 16 x 5050 RGB LED with Integrated Drivers

- SD Card Module Reader AMS1117 3.3 H1518

- 1x Transistor BC547B

- 1x Transistor BC639

- 10k Ohm Resistor

- 2x Speakers, 8 ohm, 0.5W

- Male to Female cables

- Diode 1N4004

- 3x 1k 1% Ohm Resistor

- 3x Button

Step 2: Schematic

This is how I planned out the wires.

Step 3: Code

Step 4: Finished Product

This Is how it all turned out.

To see how I made the add and hided the wires, I suggest you check out the previous instructable: