The Only Way to Fix a Arduino Uno R3, Arduino Nano Clone.

Introduction: The Only Way to Fix a Arduino Uno R3, Arduino Nano Clone.

I accidentally stumbled on this discovery!

Step 1: Fix It!

1. Open preferences in Arduino IDE

2. Open the "additional boards manager urls".

3. Paste this in to it:

4. Restart Arduino IDE.

5. Click the tab called tools.

6. Click boards manager.

7. Search the words "minicore".

8. Install it.

9. Select atmega328 under the minicore category in the boards menu.

It is fixed!

Be the First to Share


    • Battery Powered Contest

      Battery Powered Contest
    • Plywood Challenge

      Plywood Challenge
    • Plastic Contest

      Plastic Contest

    4 Discussions


    Reply 4 years ago

    What is the exact damage done to the board? I am not sure that I
    understood what is fixing your method. Initially I thought that you
    had an overvoltage and damaged the micro and the only way is to replace
    it :)


    Reply 4 years ago

    The clone arduino uno (R3) does not work when you set the Arduino IDE board as Arduino Uno. This is the correct board.


    Reply 3 years ago

    This is the correct board for when using a board with a ch340g driver running arduino board.