Vinyl Leggings




Introduction: Vinyl Leggings

About: Marketing manager for We sell fabric (stretch faux leather, latex sheeting, vinyl, etc) and sewing notions (rotary cutters, scissors, fabric adhesive, etc). I love to design and try out new fas…

Learn how to sew a pair of stretch vinyl leggings with brass ankle zips. These are perfect for rock star outfits, cosplay, halloween - you can combine them with anything to create tons of great looks.

Step 1: Gather Your Supplies

Step 2: Cut Out Pattern

Lay your Legging pattern on top of your fabric. Make sure your fabric is folded in half so you can have two cuts, one for the right leg and one for the left.

Step 3: Mark Leggings for Zippers

Measure the zippers that will go on the leg of your leggings. Mark the length of the zipper on the leg with tailors chalk.

Step 4: Cut Opening for Ankle Zippers

Make a cut on the outside of the leggings where the zippers will go.

Step 5: Baste Ankle Zippers in Place

Add a basting stitch on the pants to assist with inserting the leg zippers. I used red thread so it would be easily visible to remove. You can pluck open the inner leg stitch to make inserting the zipper easier and re-stitch it once the zipper is inserted.

Step 6: Stitch Ankle Zippers

Stitch your zipper. Remove pins as you move further along the zipper.

Step 7: Removing Basting Stiches

Now you can remove the red basting stitch.

Step 8: Pin Crotch Seam, Stitch Inner Leg Seams

Match up your rear seams of the leggings, I marked a little R for rear. Once you have match your rear seams, you can bring to your sewing machine and stitch the legs

Step 9: Insert Crotch Zipper

Take one side of the crotch at a time, sew the right side of the zipper to the right side of the crotch, and the left side of the zipper to the left crotch seam.

Step 10: Final Touches

Your finished crotch seam should look like the included image. At this point you can top stitch a hem on the waist and ankles, or since it is vinyl and the material won't unravel, you can call it a day and slide into your new vinyl leggings!

Be the First to Share


    • Puzzles Challenge

      Puzzles Challenge
    • Rice & Grains Challenge

      Rice & Grains Challenge
    • Make it Move Challenge

      Make it Move Challenge



    6 years ago

    Really interesting and a BIG thanks for sharing with us. 1 question for you: what difficulties would I have in making these for a man?


    Reply 6 years ago

    The only issue with making these for men is that the seam runs through the crotch. Because of a mans anatomy, if they are tight fitting, it could be uncomfortable.

    We are working on a mens legging pattern that doesn't use a seam that goes through the middle of the crotch. Check back with us in a couple months and we should have it available (