From the anime Attack on Titan / shingeki no kyojin.. the original costume and 3D Maneuver Gear real scale of the legion of recognition.

Step 1: 3D Modeling

A modeling was created in the SolidWorks program. using the actual measurements of the maneuvering equipment. then create the file to cut the wood in Router.

Step 2: 3D Print.

The pieces of the sword handle were printed along with the triggers and the mechanism for releasing the sword. this process took 2 days.

Step 3: Wood Cut by Router.

A sheet of MDF wood with a thickness of 5mm was purchased and ordered to be cut by means of a Router machine. This process took 3 hours. Then they left the two boxes glued for 24 hours.

Step 4: Final Details

Once armed the boxes were created with PVC pipes gas tanks were created that go over the boxes. the handles of the box were added with elastics simulating the tape around them.

Step 5: Purchase Coat and Jacket

The original coat and jacket using the reconnaissance legion was searched on the Internet. the other clothes that were used:beige pants. White shirt. long brown boots.