Control Your Light System Using Your Smart Phone




Now you can control your light system in your home using your smart phone by writing a character the LED turn on or turn off

Step 1: The Project Idea

The project idea is to proof that you can control your home lighting system using only your smart phone, so the LEDs in the project represents different systems in our home as an example.

Step 2: All You Need for the Project:

1- 1sheeld
2- Arduino Uno

3- LEDs

4- Jumbers

Step 3: Let's Know More About 1sheeld and How to Use It

1Sheeld turns your smartphone into 40 different Arduino shields.

so we don't have to buy shields for Arduino as we have them in our smart phone.

How to use 1sheeld?

  1. Stack 1Sheeld on top of your Arduino board, and write the code using 1Sheeld library.

  2. Pair 1Sheeld board with 1Sheeld app over Bluetooth.

  3. Select the shields from a list of over 40 shields.

for more information about 1sheeld and how to use shields follow this link

getting started with 1sheeld

Step 4: Connect the Circuit As Shown

Step 5: Open 1sheeld App and Connect the App With Your 1sheeld Then Open "keyboard" Shield.

Step 6: Press 'R' Red LED Will Turn On

Step 7: Press 'Y' Yellow LED Will Turn On.

Step 8: Press 'G' Green LED Will Turn On

Step 9: And Finally to Turn Off All Press 'C'

Step 10: Arduino Code



    • 1 Hour Challenge

      1 Hour Challenge
    • Colors of the Rainbow Contest

      Colors of the Rainbow Contest
    • Fandom Contest

      Fandom Contest