Introduction: LASER Stamp
What do you need :
- Machines:
CNC Laser engraver (I used GCC Spirit GLS - 100W).
- Materials:
Plywood 3mm or 3.2mm
Laser Rubber
Glue
- Settings for engraving:
Stamp mode
Invert
Mirror
LASER Stamp
What do you need :
- Machines:
CNC Laser engraver (I used GCC Spirit GLS - 100W).
- Materials:
Plywood 3mm or 3.2mm
Laser Rubber
Glue
- Settings for engraving:
Stamp mode
Invert
Mirror
