The Demon Bunny

The Demon Bunny is one of Halloween monsters, like a rabbit, has a pair of long ears.At Halloween's night, he merged with the night, listening all the sounds around it. Once heard some sounds, he would turn his head to there and twitch his ears crazily. Asking someone nearby for candies, while sometimes the ears may seem as in cramp.

please click here:http://openlab.makeblock.com/topic/580f179c5df9832...

More tutorials please visit http://www.makeblock.com/

Our community: http://www.makeblock.com/

Step 1: Part List

List: (all materials are from Makeblock)

Purchase Makeblock parts ·check now

· ·1 x Me Orion (Base on Arduino UNO)

· ·2 x Me Sound Sensor

· ·1 x MEDS150 Servo Motor

· ·2 x 9g Micro Servo Pack

· ·2 xMEDS15 Servo Motor Bracket-Blue(Pair)

· ·1 x Bracket 3 x 3 - Blue (4-Pack)

· ·1 x Plate I1-Blue (Pair)

· ·1 x Belt Connector-Blue (Pair)

· ·1 x Beam0824-016-Blue (4-Pack)

· ·1 x Beam0824-064-Blue (4-Pack)

· ·2 x Me RJ25 Adapter

More tutorials please visit http://www.makeblock.com/

Step 2: Assemble Process of the Demon Bunny

1. The work out figure of The Demon Bunny

More tutorials please visit http://www.makeblock.com/

Step 3: Assemble the Inner Mechanism.

1、All parts and the completed mechanism.

More tutorials please visit http://www.makeblock.com/

Step 4: Assemble the Substrate Connect a Steering Engine.

More tutorials please visit http://www.makeblock.com/

Step 5: Fix the Sound Sensor.

Step 6: Assemble Uper Part, the Swing Mechanism.

Parts in fig.1 for the component in fig.2

Parts in fig.3 for the component in fig.4

Step 7: Then Assemble All This Component Follow the Picture Below.

More tutorials please visit http://www.makeblock.com/

Step 8: The Finanl Step.

Connect the substrate and the swing mechanism as fig.1

Fix RJ25 adapter in fig.2,to the work out of fig.3.

More tutorials please visit http://www.makeblock.com/

Step 9: Finally Fix the Control Board.

please click here:http://openlab.makeblock.com/topic/580f179c5df9832...

Our community: http://www.makeblock.com/

Step 10: Connect the Electrict Parts

please click here: http://openlab.makeblock.com/topic/580f179c5df9832...

Our community: http://www.makeblock.com/