Wooden Karambit V.2

6,178

91

12

About: I just like to make staf xD If you want to contact me just send me massage and I will give you my email.

In this tutorial I am going to show you how to make this karambit you see in picture up here.

Step 1: Get a Template and Print It

Step 2: Cutting

Cut the parts from the template and glue it to the wood then cut it.

Step 3: Glue and Sand Parts

You can use any glue for wood.

Step 4: Chose or Make Your Paintjob

Step 5: Painting

Step 6: More Painting

Step 7: Finishing Touches

Use nail polish or someting similar for the details

Share

    Recommendations

    • Arduino Contest 2019

      Arduino Contest 2019
    • Fandom Contest

      Fandom Contest
    • IoT Challenge

      IoT Challenge

    12 Discussions

    0
    None
    Kentish

    3 years ago

    I built this an hour after seeing it, it works great

    1 reply
    0
    None
    DzefriKentish

    Reply 3 years ago

    Could you post pictures of it? :-D

    0
    None
    ajones97

    3 years ago

    Cool design but the blade is backwards no back edge for wrist locks. No good for silat drills.

    1 reply
    0
    None
    Dzefri

    3 years ago

    Thanks :-D