Tell us about yourself!
I LOVE THIS! I know my granddaughter would love this! So I guess I'll get her mom to measure my granddaughters finger(of her choice) and I'll make it for her. I know she'll be tickled pink (or should I say gold)!
Table Saw Class
Beginning Leatherworking Class
Mold Making & Casting Class
I read and watched this instructable and I love the results, however I'm not sure I could do this the wiring part is confusing to me. I would really love to make some for various things but I think I'd have to give this to my son to figure out after I had made the physical parts. That being the acrylic and wood parts and the electrical I will leave to my son, he's great with that stuff.
How beautiful and inspiring! I know I'd like to make a couple at least 2 for end tables in my familyroom and maybe another as a coffee table to match. But first I need to get my garage cleaned up so I can get to my bandsaw, tablesaw, etc.
Laptop Stand From Plywood
Easy Pumpkin Bread
So I have a question. These look really delicious, but if you've cooked them over coals or wood, will it work for gas grills?
This is beautiful and easy enough to make. It looks like it doesn't need any really expensive machines to make. I'm glad it looks so simple to make, so I'm going to try to find some scrap hardwoods and maybe make a couple of mugs so I can make a couple match sets for gifts and a set for us. They're just so beautiful!! Thank you!
I wanted to mention that we're going to put a pond into our large garden that I can't use due to my disabilities, so it's going to be a water feature and put the feeders around the whole area and use it to make my yard even more beautiful. Your instructions are wonderful and I do like the cardboard model and it make be old school but I'm going to use that idea to make sure I get it right. Thanks again!
This is excellent! I was wanting to make a birdfeeder that could hold enough to last awhile. Our last place we lived we had a small feeder and the birds would go through so much seed and we were always filling it. So hopefully this one would last longer, but one of the differences for us will be that we have larger birds here and they already snack on the apples in our trees, so hopefully the feeder will be just a supplemental feeder. I think though I'll have to build two so I can put food for the larger birds in one and the smaller birds in the other. I can't wait to get started!
My Favorite Ring
I've always wanted to make my own ring as I have never found what I'm looking for. I have seen other rings made that don't have stones in them, and I loved them too. So now you've given me some ideas for making some jewelry I can't wait to do. Thanks and not only will I go through your jewerly class, my local craft store has classes on different crafts and one of them is jewerly of which I'm also hoping to take to get the hands on teaching/learning area. Thanks again!
Weaved Bathroom Hamper and Litter Box
That's beautiful but I don't have a cat so the litter box part would be a waste for me. So I'd have to make another door and turn that into another storage section. Maybe a shelf in that section and leave off the door even. Great idea!
Vinyl Record Wall Clock - Iron Man
This is so FABULOUS!!! I can't wait to make one and like you said make different face vinyls for different seasons. It'll be awesome in my kitchen, as my kitchen is hard to customise because of the house I'm in is a rental. This allows so much fun making it work since it's what I or should I say "we" like. THANKS!! I'll send you a picture when it's done and again 'THANKS'!!
Question Steve, Why is it that you don't mention anywhere about the transitor (not sure of spelling), you don't mention it at all in the instructions but when you watch the video you can see it when you connect the yellow wire to the led? Is it not necessary?
Great Idea!! I've wanted to do a countertop or such with concrete, so this is great cuz I need a outdoor coffee table and matching end tables, so this is a great idea, one I can't wait to use. I was thinking of adding colouring to the concrete to make it even more special. So I have to say I also like Wild-Bill's idea of putting coloring into the concrete and using contrasting aggregate and using diamond pads and a grinder to finish it up. I think I'm going to try it. I hope it works and becomes a beautiful addition to my yard and lawn furniture. Thanks!!
I saw a similar one, but much larger here on "Instructables", but it was large and bulky. So this is a FANTASTIC addition to any craftroom or workshop. I do a lot of crafting and cut various different kinds of items, so this would be so helpful to me. I can't wait to build it and I'm going to build two so that if one breaks or just wears out I'll have one already to go. Thank you for your creation!
This items' instruction is incomplete. You have no sizes and tool information on here. What size MDF is used - 1/2" or 5/8" or what? What size boards for the legs and frames? What tools did you use to make the cuts and what did you use to sand with or did you? What about the size of the workbench other than 2' wide? What about the height? I'd love to make this for my craftroom but you have it soooo simple that there's no way to know what to use to make this. And as one of the others stated if you don't know MDF stands for 'medium density fiberboard'. And yes it's heavy no matter how thick it is. Home Depot sells it in different sizes besides different thicknesses. Also what size is the pegboard? And what tools do you need and things like screws or nails?
Pasta Making Class
Thank you so much LanceH19. I appreciate your help. Now I can get the parts and start my build.
Please anyone reading this if you know the answers to my questions will you please email me at email@example.com and tell me what they stand for. The following abbreviations I don't know please tell me what they are: spgxfpt and mpt. I know everything else and recognize, can't make this til I know what you mean. HELP!
So okay I missed an abbreviation that I don't know. What does fpt stand for? Again as I asked before send it to firstname.lastname@example.org and Thanks.
This is gorgeous I love the way it looks! I live in a rental so I can't do it to my kitchen but the home is in need of some sprucing up, so I'm hoping to find a way to do this in one of the bathrooms or in my craft area somewhere.
Portable Pegboard Workstation
How to Make a Garden Fountain Out of, Well, Anything You Want