Action-Script's instructables
Achievements
- Action-Script's instructable Portable Instant Pi Camera's weekly stats:
4,201 views58 favorites3 comments
- Action-Script commented on Action-Script's instructable Portable Instant Pi CameraView Instructable »
Camera module boards come with a default attached lens. You can easily remove the lens that is attached to the board by a threaded by twisting it. Then, you will then see the camera sensor.Next, place a M12 Lense Mount (it's a plastic structure that holds the M12 camera lens). The holder is mounted onto the board using 2 x M2 screws.And the new lense is just screw into the mount.Good luck
- Action-Script posted an instructable Portable Instant Pi Camera
- Action-Script followed GreatScottLab
- By GreatScottLab
- Action-Script completed the lessons Light Bulbs, LEDs and Lighting Class, Getting Started, EL Wire and 3 others in the class LEDs and Lighting Class
- Action-Script completed the lessons Flexible Block Molds, Two Part Molds, Simple One Part Mold, Mold Making & Casting Basics and 2 others in the class Mold Making & Casting Class
- Action-Script commented on Action-Script's instructable Interactive Led Lamp | Tensegrity Structure + ArduinoView Instructable »
Dear Hamza,The lamp structure is based on a icosahedron following the tensegrity technique.https://commons.wikimedia.org/wiki/File:Tensegrity...Is made by 6 solid sticks and 6 individual rubber rings.I made this project with recycled materials, the rubber bands comes from a local market; the sellers use them to wrap the packing boxes. So I dont know which exactly material or brand it is.The size of the rubber depends on the elasticity and maximun extrength of the band.Good luck.
- Action-Script commented on Action-Script's instructable Interactive Led Lamp | Tensegrity Structure + ArduinoView Instructable »
Hi there Vivian.The ACAngle.h file is included in multiple libraries. I can recommend you to include the "Adafruit Unified Sensor" library in your project. And, if you are using the same hardware, then also add the "Adafruit LIS3DH".For the LEDs I'm using the NeoPixel RBGW so I included he "Adafruit NeoPixel".These libraries are dedicated for the hardware I used at the lamp. Depends on what hardware you are using, you may need different libraries and perhaps change a bit the code.Good luck.
