Tell us about yourself!
if I unplug the wire from the button, it turnes off. As long as it's connected, it's always on. pressing the corresponding button on the controller won't do anything The d pad works fine. but I can't get the buttons to work. I connected the white wire from on of the dpad buttons for the gnd and the blue wires are connected to the corresponding pin like you've shown in the picture above. so do I swap the blue and white wires for the dpad or the red black wires for the button? thanks for your help!.
So I wired everything exactly how you've shown in the pictures, and when I plug the controller in, the d pad works, but the buttons are always turned on, and pressing the buttons on the controller won't turn them off. they're always on? Any suggestions? Thanks.
Thank you very much for updating the tutorial! I'll notify you soon when I'm finished with the project. Again thank you!
hello. just wondering when you will be able to update the tutorial on which wires to connect to the encoder. Thank you.