Albertthecomputerguy

This probably isn't a big issue, but for step 10 if you are going to use wood glue it would be a good idea to scrape off the paint where the glue is going to go, because wood glue sticks better to wood than paint.

Wow! That is awesome! I really didn't expect video quality that good from that little camera module.

Amazing! I finally got it to work :D

Wow! Beautiful design. I just voted :D

Thank you guys for all of the nice comments. I'll be safer in the future.

Great idea! I'll have to try it some time. Thanks for the comment.

That looks like an amazing saw! Good job! I've been needing a table saw, so I might make this design.

Thanks. I did enter it into the Wood contest. I do try to be safe, but wearing safety glasses throughout the entire project is a little much for me. I do make sure to wear them when I'm sawing.

Thanks :) To work out the frequencies I found the volume of the box, and decided what thickness of pipe to use, and picked a frequency and then put it all into this online program called port length calculator. Then it tells you how long to make the pipe. Here's the link: http://www.mobileinformationlabs.com/HowTo-1Woofer-Box-CAL%20Port%20lenth%201.htm It doesn't really matter what kind of pipe you use though, and 47 hz sounds pretty good, but there is a lot of whistling noises coming from the port when it's cranked loud.

Thanks :) To work out the frequencies I found the volume of the box, and decided what thickness of pipe to use, and picked a frequency and then put it all into this online program called port length calculator. Then it tells you how long to make the pipe. Here's the link: http://www.mobileinformationlabs.com/HowTo-1Woofer-Box-CAL%20Port%20lenth%201.htm It doesn't really matter what kind of pipe you use though, and 37 hz sounds pretty good, but there is a lot of whistling noises coming from the port when it's cranked loud.