Alex 2Q

I would try the term cutting mat when looking on amazon etc.

Fantastic work Dan!

Thanks a lot!

Thanks a lot mate!

Good idea to get something to hold your piece when doing this with an angle grinder. Vice grips seem like a good option but will require some practice to get a feel for. Good luck and that Makita grinder sounds like a bragain you shouldn't miss.

No didn't really had time yet to test them out since I headed right into the next project. But there is a project down the line that will allow me to test them out.

Thanks a lot! I'd love a CNC and hopefully at some stage will but for now I'll have to use what I got. I've also used flap disks before but I wanted to preserve some of the texture (the rust pitting) and was afraid a flap disk might be too agressive for such thin stock.

Wow that looks super delicious! It's midnight here but I somehow have the urge to head to the kitchen :D

Thanks a lot Vince! How are things going?

Thanks a lot!

Yeah that would be super cool! It would be great if you would post a picture of yours once you are done!

Nicely done! You got my votes for this one!

Hey, I really liked this one! Well written and documented. I made a similar sized knife before to be used in an Altoids tin but using thinner stock to use in a wallet is a great idea. This one went right onto my to do list.You got my vote good luck in the contest!

Wow, that came out great John!

Wow this is so amazing! Well done!

Great idea & instructable!

Wow! Great Instructable, well written and documented!

Very well written and documented! Thanks for sharing!

Very well written and documented! Thanks for sharing!

Very well written and documented! Thanks for sharing!

Thanks for sharing this looks like a very well documented project!

Well done & interesting project! Quick tip though: You can edit the Instructable to include the information you posted down here in the comments.

Well done and documented! You've got my vote!

Very cool way to create a hidden compartment!

Great project and video as usual!

Great Instructable and video (As usual)!

Great tips! Some I knew before and some were new to me. I've been using those accordion style folder for a while to organize my sandpaper. I have multiple folders for wet sanding, dry metal sanding, wood etc. I recently saw a similar folder that can be hung on the wall for quick access.

Great design and well written & documented Instructable!

Wow this has been a great Instructable! Well written, documented and packed with additional tips and tricks!

Well written and documented Instructable!

Thanks a lot that is very kind of you!

Thanks a lot for sharing! I love to draw & sketch and really get back into it more these days. There was a lot of thing I've learned from this. Maybe you can expand this to be a series of techniques and tips?

Thanks now I'm hungry! That is a recipe to keep in mind for the next bbq!

Great story and project!

I'm no woodworker but I watched the entire video and then read the Instructable because I was interested to see how you managed to batch out such a large order.Great work on both the video and write up! You got my vote!

I really like the finished pattern! This could also work great for knife handles. You got my votes!

I will have to try this out!

Wow, great first Instructable and project! Really well written and the design of the chair is pretty cool too!

Nice idea and so open for people to go crazy with design ideas!

Nice work! Maybe an additional picture with some flies in the tins would be a nice finishing touch ;)

Awesome project! I loved that movie and seeing this detailed work brings back so many memories!

Awesome work! Great write up and video!

I like the recipe idea! The video was quite good too.

Awesome I look forward to see what addons you come up with for your bench!

Awesome project! I really liked to see those different techniques although I'm no woodworker.

I really like this project (and combination workbenches like this in general). It was written and docummented really well.One thing I noticed is that there is no riving knife attached to the saw. Not sure if that saw model doesn't feature one but using the saw without one greatly increases the risk of kickback and accidents. I think that is something you should look into.Have a great time!

Yes it was a very good read! Congrats on the feature!

So great to finally see you write a new instructable! Well worth reading, you got my vote!

Well written and documented Instructable! You got my vote!

Excellent Instructable!

Now that's what I call an outside the box idea!

Great project and Instructable!

Great design and work as usual Guido! I loved the drawing part especially of the video and think about using that more in my videos.

Nice and stylish project! I agree with the previous comment though that the magnet might be an issue for your magnetic strip cards. Maybe a velcro or snap button strap instead? Cheers

Great to see you here on the Instructables community! Welcome and thanks for sharing this awesome project!You should look at entering this project into one of the running contests such as the Fix it contest (https://www.instructables.com/contest/fixit2017/) or First Time Author Contest (https://www.instructables.com/contest/fta2017/).CheersAlex

Great design, video and write up! You got my votes!

Hi Timothy,thanks a lot for pointing that one out! You are absolutely right I used the wrong terminology in the header for step 11.Just fixed that one.Cheers Alex

Well done Sebastian! Also congrats on the features!

Awesome design and instructable!

The sanding table for your belt sander is also a cool and simple idea I might steal ;)

Great design! I love to make kiridashis myself and will look to try that hammer pattern too.

Nice work!

Interesting and well documented project! You got my vote!

Well good for the authors since they are based in Cyprus ;)

Thanks for the clarification!

Nice idea!

Nice idea!

Wow amazing Instructable! You got my votes!

Thanks for sharing! I was just thinking about making this type of shelves and found this. Very useful info and tips!

Nice work! I like the fact that you used mainly basic tools for this project!

Beautiful work! I like the choice of materials and overall design.

Wow amazing project! I loved the video and the overall choice of materials as well as the combination of form and function.You got my vote for the contest.One question I have though. The blade seems to be a pressure fit and since the cutting edge is off center I was wondering if the blade might move when it is cutting through the grain?

I like the idea and realization! Well done

Awesome concept! I can't believe you only have 9 subs here so you got one more now ;)