AxelP6

What a wonderful instructable ! thanks a lot !The parts are now all here, i'll start to made it this week-end.I read about issues in the comments, all should know that Chinese power supply have a very poor quality. To solve it, a little PCB on the 5v with 2200µF electrolytic capacitor and ceramic 100nF capacitor to clear the noise and to have a very good 5v stability.I'll post pictures when finished ;-)

Oupsssss sorry "rinkydink" instead of "rinkydinky"

Hi Jay,Sorry i was fully at work these last days, send me your email address by PM, i'll send you the files for fonts.If you make a search in google on "rinkydinky font" you should find the site.Greetins,Axel

Hi Jay, there's 2 possibilities, you can download the fonts here : http://www.rinkydinkelectronics.com/r_fonts.phpOr you change the the fonts i included with the library 's fontsAnd verify if you libraries are up to dateRegards

I connect 1 pin to GND (with 10k resistor) one pin to +5, and on the other side of the button, just the pin from ground to D4 on arduino, here i'm at work, i'll send you a schema this eveningGreetings

Hi Jayfmn,Could you try with ide instead of codebender ? Or you can try with "Frequ = String(s)"Let me know if it worksGreetings

Hi Wim39,You just connect it to a digital pin with 10k resistor, and you change the stations which are loaded on the sketch, you can use the internal pullup, but i always prefer external one ?Greetings

With pleasure Seamster ;-)I'm just waiting for the goods ! when you want some very good prices, you need to be very very patient lol :-D i think in the next 2 weeks all should arrives and the challenge will starts, to use the touch screen for all the functions, and different pages ;-)